Vibratory dryer is the continuous drying range that builds on the proven Umang technology and its benefits. Similar design of Vibration distribution plate and vibrators ensures that process and validation wise there is no difference to the drying process. This unique design of process plate, and vibrators makes the not only a perfect drying system but also an ideal machine.
The outstanding feature of the Vibratory dryer range is the integrated and CIP optimized design. Connections, cabling and supplies are completely integrated, covered and sealed so the outside of the machine is smooth and very easy to clean. The innovative discharge valve design and optimized seals inside the bowl allow for CIP. As a result of this the our Vibratory dryer is highly flexible, quick product changeover increases productivity and cost effectiveness.
The Vibratory dryer ranges from 25 to 1200 liters / hr. drying capacity featuring through the wall design and movable head, allowing operation with platform and dust-free discharging via a linked mill directly into an IBC. The Vibratory dryer can be stand-alone or linked to a fluid bed to form an integrated system.
UCFD-300 is used for drying of granules / pellets in Fluid Bed. This machine has been accommodated with blowers, vibrator and filter for fluidization. The airflow line is fitted with pre-filter, Hepa filter and electrical heaters to condition the inlet air to the processor.
Vibratory fluidized dryer consist of vibrating tray conveyor where hot gases from the chamber will flow through the holes within the tray and come in contact with the materials to be dried. The tray area is big enough to tolerate constant flow of material through the bed and passed along the deck with a low depth on the tray. The vibrations to the deck are directed in vertical component to assist in fluidization of the material whereas the horizontal component of the vibration, support in transporting materials along the tray. The filter bag is a format part and the porosity of the same to be selected with reference to the particle size of the product.
The machine is fully automatic and controlled by Siemens make PLC and Delta HMI. The process variables can be adjusted to account for changes in the output characteristics of the product. Production capacity of these pieces of equipment is 300 kg/Hr.